How To Attach A Patio Roof To An Existing House

Photo of author
Written By John Wout

This post may contain affiliate links, which means I may earn a commission, at no cost to you, if you make a purchase through a link.

If you are looking to add some extra living space to your home, learning how to attach a patio roof to an existing house is a great option. Not only does it provide shade and protection from the elements, but it can also be a great place to relax or entertain guests.

Adding a patio roof to an existing house is a fairly straightforward process, but it’s important to take into account the weight of the roof and the load-bearing capacity of your home’s structure.

How to Attach A Patio Roof to An Existing House

On a patio, it’s a great way to pass the time. Because of this, the sun or rain will make it look bad. Because of this, you will need to build a patio roof.

It not only protects you from the sun and rain, but it also makes your home look better. Continue reading to learn how to add a patio roof to an old house.

The Most Popular Ways to Turn an Existing House into a Patio Roof

Intermediate carpentry skills and some creativity are needed to attach a patio roof because there are so many different ways to do it.

It’s not the same for each person. When the patio roof is put incorrectly, it will look good with the rest of the house and provide year-round entertainment for you and your family.

There are seven different ways to attach a patio roof to an existing house.

1. Fix the Fascia Boards Directly Under the Gutter’s Back Channel

As you can see, this is an easy way to keep a patio roof in place. To keep the backchannel and the fascia from buckling, two rafters are added inside the roof to make them stronger.

It’s easy to do, but this method stops you from going too high or too low.

2. Add A Few Inches To The Height Of The Patio Roof

This method is almost the same as the first, except that you’ll need to remove the gutter from your house and raise the backchannel a little to fit the raised patio roof.

Because the gutter was removed, you’ll need to put transfer flashing between the roof of your house and the patio. There are more than 100 millimeters of height that you can gain with this tool.

3. Install Some Riser Brackets for More Height

If you want the patio roof to be a certain height, you can use riser brackets to raise the roof. It needs a custom barge cap to cover the patio roof, which is raised with brackets.

Even though this will only raise the ceiling two feet, it will also give you a lot of beautiful options for how the room will look and feel when it’s done.

When you want to let some natural light into your patio, you can use opaque twin wall sheets.

Light can pass through the twin wall sheeting that was installed between the patio roof and the barge cap, which lets it in.

If you don’t like natural light and want to keep it out, insulate the space between the patio roof and the barge cap and close the back door. This will help you keep out the light.

For a cleaner, more appealing look, add some more flashing wall covering. The brackets can then be sealed from the front so that they don’t get wet.

4. Let The Air Flow, Prevent The Splash Of The Rain

Keeping you dry and protecting you from the sun’s glare are the main goals of a patio roof. Unfortunately, it is sometimes necessary to stop airflow.

To keep rain splashes out but still let air in, drape the patio sheeting about 300 millimeters above the roof’s peak. This will allow the sheeting to act as a rain shield while not blocking airflow.

This is the best thing to do if your patio is completely closed off and there isn’t much airflow.

5. The Simplest Way To Get The Cleanest Look

To get the cleanest look possible, attach the backchannel and patio to the wall of the house.

It not only makes you look better, but it also protects you from the weather.

6. Raise The Roof By 500 Millimeters

It’s possible to raise the patio roof by 500 millimeters if you remove the eaves, the fascia, and the gutter. Following that, cut the rafters to match the wall. Do this next.

When the backchannel is made, it is made stronger and attached to the rafter. This method gives a clean finish that is close to the wall line.

If you want to finish the look, transfer flashings can be added on top of the paint.

7. Keep Things Neat And Tidy

To make the house look clean and tidy, more height is needed, which means taking down the eaves, fascia, and gutter, as well as cutting the rafters.

There should be columns of FHS that are glued to the wall. When the patio is done, attach it to the rafters by putting it in and reinforcing it. The beam must be raised above the height that it needs to be.

On top of the house, you’ll need to make a custom box gutter and a custom barge to keep water away from the house.

It will help you make sure that everything is safe. You might have to cut some wood to finish the job.

Some Steps on How to Attach A Patio Roof to an Existing House

It’s hard, but not impossible, to add a patio roof to a house that already has one. If you’re not very good at carpentry, all you need is professional help.

Steps:

  1. To figure out how high you need to keep your sightline clear, you should measure from your roof to your home, not the other way around.
  2. In this case, think about how long you’re going to use the beam you’re going to use.
  3. You can choose to remove or keep the eave.
  4. Lag bolts and a screwdriver are used to keep the posts’ bases in place on the ground. You need to make sure they are level.
  5. An angle cut should be made on one of the sides of one of the horizontal beams that make up the roof. It must be done very well for the rafters to fit on it.
  6. Use a nail gun to nail down the horizontal beam. Cut the two outer rafters so that they are level with the roof of the house that already stands.
  7. You can now put together the outer rafters and attach the rafter beam to the edge of the roof of your house.
  8. When the rafters are still being put in, cut each end of the house to fit the top of the rafter beam.
  9. Once all of the rafters are in place, build the patio roof by attaching the planks horizontally to the rafters.
  10. To cover the patio roof with shingles, use black roofing felt and only one layer of OSB. Following their installation, you can start putting down roofing shingles.

Once the patio roof is in place, you can decorate it to make it as comfortable as possible. You will be ready for rain and sun glare.

Final Thoughts

Patio roof installation isn’t as difficult as it first appears. All you need are the right tools and some carpentry skills. You can do it on your own, or you can get some help from professionals.

Patio roofs are a great way to improve the look of your house as well as increase comfort. It is a good investment, and you will be able to enjoy it for many years.

Related Posts: