If you’re looking for a way how to hang patio lights without nails, look no further! There are several ways to do this, and the one you choose will depend on how many lights you want to hang and how permanent you want the installation to be.
7 Ways On How To Hang Patio Lights Without Nails
Patio lighting will make your patio more fun. It will also make your home look better and have more of a good first impression. It doesn’t sound like you want to nail them to the wall, but is there a way that doesn’t?
Staples to attach them to the wall if you want to keep them in place. To use them, you can hang them from trees and bushes as well as from pots and potted plants.
Glue on Hooks
The simplest way to hang patio lights is to use glue on hooks. This doesn’t need any glue. Instead, buy hooks that stick to things, like these Amazon Command Wire Hooks.
Peel back the paper that covers the adhesive and stick the hook to the wall to hang your patio lights. This will make it easier for you to do.
This type of hook is good because it can be removed without leaving holes in your wall like screws would. However, there are a few drawbacks to the idea.
Among other things, you can’t move the hooks from one place to another at all. This happens when you peel away part of the wall that is stuck to the ground. It usually loses its strength and may not be able to stick to anything else on the ground anymore.
If you use a certain type of product, you may still see some adhesive on the wall after the lights are removed (if you try to remove them). Excess adhesive could make your home look bad.
Make sure you only use adhesive hooks on wallpapered walls if you plan to leave them there for good (or at least until you decide to get new wallpaper). To remove wallpaper adhesive, you must first remove the wallpaper. This can cause damage to the wallpaper, so you should not do this.
Any adhesive that is left on the wall can be easily removed and used again with new adhesive hooks. After you remove the hooks, use a hairdryer to soften any adhesive that is still there. Scrape off any remaining adhesive with a piece of floss.
Use Tape
If you can’t find adhesive hooks or are concerned about their strength, you can always use tape. Clear tape is better because it is less visible. Clear tape peels off with less residue.
On the other hand, duct tape, which is usually more durable, may leave a mark on your wall. In the end, you might still have some gray material that you can peel off of it.
If you need to get rid of some duct tape residue, heat the tape with a hairdryer. A knife can help you remove the paint as well. Make sure you don’t cut into the wall when you do this, though! With soap and water, you can also gently scrub the tape residue with it to remove it.
Use Staples
Staples can be used instead of tape. Staples are usually safer than tape. In bad weather, your patio lights could fall if the tape isn’t tight enough. Staples, on the other hand, can do a lot of damage to your home.
Staples, on the other hand, can only be used on certain types of walling, such as wood. Staples can’t be used on stucco siding.
Hang Them On Gutter Hooks
Adhesive hooks aren’t as good as gutter hooks. As the name implies, gutter hooks are shaped like an S and hang from your gutters, just like the name implies. You can now hang your patio lights from the end of the hook that is on the other side.
In this method, the hooks are not attached to anything, so they can be moved at any time. Some people don’t like this method because they can only use gutter hooks on one side if they want to hang their lights across their whole patio with them.
If you don’t, you’ll only be able to put patio lights on one side of your patio, which may not be enough to light up the whole thing.
Hang Them On Tree
Hang your patio lights from any trees that are close to the area where your patio is. While some people wrap string lights around a branch, there are better ways to hang patio lights from trees. Drill a hole in the tree. Finally, put a hook through the hole. Then, wrap your string lights around the hooks.
You should use this method if you have trees in your yard because it doesn’t hurt your walls. Adhesive hooks may damage some types of walls. Unless you have trees, this method won’t work.
It is possible to use trees in conjunction with other things. If you don’t have enough trees, you can use your railing by attaching hooks to trees.
Make sure there is enough space for your patio lights when you drill holes in your trees. More holes spaced apart means the string will be tighter. When there are more holes in the string, it will be easier for the string to move.
Hang Them On Your Railing
There are many ways to hang the lights on your railing. This is a good idea if your patio doesn’t have any trees. You can always drill holes in your railing and hang things from them, but this will eventually make it weak. Adhesive hooks can also be used to attach to your railing, as can screws.
Railings are often cheaper to fix or replace than the whole outside of your home, which makes them a good place for adhesive hooks. Instead of attaching the lights to the railing with adhesive hooks, you can staple or tape the lights to the railing instead.
As another benefit, you can staple or tape your lights to the railing so that they stay in place. There will be no way to tell that there are staples or tape there. If you move your lights, the tape residue will be less noticeable.
Hang Them On Bushes
If you don’t have any trees on your porch, but you’re willing to buy some bushes, you could hang your lights from the bushes. It’s OK to change the string’s direction around the trunks of trees. The bushes can be on or off your porch. If they are off, make sure they are at a height that lets light in.
Why Use Nails When Installing Patio Lights?
Preface: Why is nail-free installation better?
Nails Can Damage Your House
Your home’s siding will tell you whether or not you can use nails to hang your patio lights. If your home has stucco siding, nails can’t be used to hang patio lights. As a bonus, you may want your patio lights to be easy to move from one place to another. Nails won’t let you do that.
Improves Your Home’s Curb Appeal
It’s also a good idea to add patio lights to the outside of your home to make it look better. It will be easier for you to charge a higher price for your home if your patio is well-lit. You can take pictures of your home and patio at night, so you can charge more.
If you have a for-sale sign on your front lawn, having a well-lit patio will help people picture themselves living in your home. It will get more attention, and people will be more interested in buying it. As a bonus, they’ll be willing to pay more money for the service.
Improves Your Quality Of Life
Patio lights will only enhance your outdoor experience. If the weather is nice, you can spend the night on the patio with your family. Even if it’s dark outside, you can read, work, or watch Netflix. Overall, it allows you to spend more time outside.
We’ll show you how to hang lights on your patio without nails in the next steps. There are a lot of string patio lights that most people think of when they think of patio lights.
Final Thoughts
No matter how you decide to hang your lights, make sure that they are secure and that they will not fall. You do not want to be in the middle of a party and have your lights fall and ruin the mood.
Also, remember to calculate how much light you need and how many lights you will need to achieve the desired effect. You don’t want to buy too many or too few lights, as that will also ruin the mood.
With these tips, you can hang your patio lights without having to use nails and without ruining your walls or railing. Now, go out and decorate your porch for the holidays!
Related Posts: