You know that when something breaks in your house, it can feel like a real pain to fix it. Especially if the thing that’s broken is something that you don’t have any experience fixing it. Well, have no fear – we’re here to help. In this guide, you will get to know how to remove Moen faucet handle without screws.
How To Remove Moen Faucet Handle Without Screws
The first thing you need to do is identify the problem. The most common issue with Moen faucets is that the handle falls off. So if your handle is loose, that’s probably the problem.
Once you’ve identified the problem, you need to get your tools together. For this project, you’re going to need:
- a wrench
- a lubricant
- hammer
- chisel
1) Find the Correct Size Allen Wrench
First of all, you’re going to need an Allen wrench. This is the tool that you’ll use to remove the screw from the faucet handle. However, not all Allen wrenches are created equally – you need to find one that’s the right size for your faucet. If you don’t have one on hand, you can always go to your nearest hardware store and pick one up.
2) Place the Wrench Over the Screw and Turn Counterclockwise
Once you have the wrench, it’s time to start removing the screws. Place the wrench over the screw and turn it counterclockwise. You should be able to loosen the screw fairly easily this way.
3) Remove the Screw and Handle
Once the screw is loose, you can remove it entirely. Then, you can simply pull the handle off of the faucet. You’ve successfully removed the Moen faucet handle without screws!
4) If the Handle Is Still Stuck, Spray WD-40 or a Similar Lubricant Around the Screw and Try Again
If the handle is still stuck, try spraying WD-40 or a similar lubricant around the screw. This will help to loosen it up. Then, you can follow steps 2 and 3.
4. If All Else Fails, You May Need to Use a Hammer and Chisel to Remove the Screw
If you’ve tried everything and the screw still won’t come loose, then you should use a hammer and chisel to remove it. Place the chisel over the screw and hit it with the hammer. This should be enough force to loosen the screw and allow you to remove it.
Removing a faucet handle without screws can be a bit tricky, but with these steps, you should be able to do it.
Tips & Tricks:
-If the handle is loose, it’s probably because the screws have come loose. So make sure to check the screws before you start trying to remove the handle.
-There may be some resistance when you try to remove the handle, so don’t use too much force.
-The valve is located at the base of the faucet and is held in place by two screws. So make sure to use the wrench to remove it.
-Once you’ve put everything back together, make sure to test the faucet to make sure that it’s working properly.
How to Install a New Moen Faucet Handle?
If you’ve just removed the old Moen faucet handle without screws and need to install a new one, follow these steps:
1) Find the Correct Size Allen Wrench
First of all, you’re going to need an Allen wrench. This is the tool that you’ll use to remove the screws from the faucet handle. However, not all Allen wrenches are created equally – you need to find one that’s the right size for your faucet. If you don’t have one on hand, you can always go to your nearest hardware store and pick one up.
2) Place the Wrench Over the Screw and Turn Counterclockwise
Once you get the wrench, it’s time to start installing the screws. Place the wrench over the screw and turn it counterclockwise. You should be able to tighten the screw fairly easily this way.
3) Install the Handle by Aligning It With the Faucet and Pressing Down
Once the screw is tight, you can install the handle by aligning it with the faucet and pressing down. The handle should now be securely attached to the faucet.
If you’re having trouble installing the new Moen faucet handle without screws, you can hire a professional. A professional will be able to do it quickly and easily, so you can use your faucet again.
FAQs:
Q: I’ve tried everything but the screw still won’t come loose. What should I do?
If you’ve tried everything and the screw still won’t come loose, then you may need to use a hammer and chisel to remove it. Place the chisel over the screw and hit it with the hammer. This should be enough force to loosen the screw and allow you to remove it.
Q: I can’t seem to find the screw that’s holding the handle in place. Where should I look?
If you can’t seem to find the screw that’s holding the handle in place, then it’s probably located on the underside of the handle. Check underneath the handle to see if you can find it. If you still can’t find it, then take the faucet to a professional and have them remove it for you.
Q: I’m having trouble removing the retaining clip. What should I do?
If you’re having trouble removing the retaining clip, then use a pair of pliers to do it. Place the pliers over the clip and squeeze them until it comes loose. Once the clip has been removed, you should be able to pull the handle off of the faucet.
Q: I’ve installed the new handle but it’s not working properly. What should I do?
If you’ve installed the new handle but it’s not working properly, then you may need to replace the cartridge. Take the faucet to a professional and have them replace the cartridge for you.
Final Thoughts:
So, removing your Moen faucet handle without screws is a fairly easy process, as long as you have the proper tools. If you’re having trouble, you can always hire a professional to do it for you. In most cases, the screw that’s holding the handle in place can be easily removed with a wrench. The handle can then be installed by aligning it with the faucet and pressing down. If the handle isn’t working properly after installation, you may need to replace the cartridge.
Related Posts: