Doorknobs are one of the most commonly used pieces of hardware in a home. They are used to open and close doors. Over time, they may become loose and need to be tightened or removed and replaced. Many doorknobs have screws on the inside that must be loosened in order to remove them. However, there are some doorknobs that do not have screws.
This article will show how to remove door knob with no screws.
How To Remove Door Knob With No Screws
The first step is to identify the type of doorknob that is being removed. There are two types:
- single-cylinder
- double-cylinder
A single-cylinder doorknob has a keyhole on one side and a knob on the other. A double-cylinder doorknob has a keyhole on both sides.
The next step is to identify the type of door that the doorknob is being removed from. There are two types:
- inward-opening
- outward-opening
Inward-opening doors open towards the inside of the home, and outward-opening doors open toward the outside of the home.
The type of doorknob and door combination will determine which method is used to remove the doorknob.
Methods for Single-Cylinder Doorknob:
The following methods are for a single-cylinder doorknob.
Method 1: Use a Flathead Screwdriver
The first method is to use a flathead screwdriver. The screwdriver should be inserted into the keyhole and turned in the direction that the knob is supposed to turn in order to open the door. This will loosen the doorknob.
Method 2: Use a Wrench
The second method is to use a wrench. The wrench should be inserted into the keyhole and turned in the direction that the knob is supposed to turn in order to open the door. This will loosen the doorknob.
Method 3: Use a Hammer and Nail
The third method is to use a hammer and nail. The nail should be hammered into the hole on the side of the doorknob. This will loosen the doorknob. Once the doorknob is loose, it can be pulled off of the door. And the doorknob can be replaced with a new one.
Methods for Double-Cylinder Doorknob:
The following methods are for a double-cylinder doorknob.
Because the double-cylinder doorknob has a keyhole on both sides, the methods are reversed. That is, the screwdriver should be inserted into the keyhole on the side that does not have the knob and turned in the direction that the knob is supposed to turn in order to open the door. And the wrench should be inserted into the keyhole on the side that has the knob and turned in the direction that the knob is supposed to turn in order to open the door.
Once the doorknob is loose, it can be pulled off of the door. And the doorknob can be replaced with a new one.
If the doorknob is being replaced because it is old and worn, the screws on the inside of the door should also be replaced (if you have). New screws can be purchased at a hardware store.
Replacing the screws is not necessary if the doorknob is being replaced because it is lost or stolen. But it is always a good idea to replace the screws when they are old and worn. They can become loose over time and may not keep the door closed properly.
Replacing a doorknob is a simple process that can be done by anyone. The type of doorknob and door combination will determine which method is used to remove the doorknob.
Safety Precautions That You Must Take:
1) Always make sure that the door is unlocked before removing the door knob.
2) Be very careful when using a hammer and nail. Make sure that you do not hit your hand or fingers with the hammer.
3) Always make sure that the doorknob is properly installed before using it. Improper installation can cause the doorknob to come off of the door while it is being opened or closed.
4) Make sure that the doorknob is turned off before leaving the home. This will prevent someone from being able to unlock the door from the outside.
5) If you have screws, make sure that the screws on the inside of the door are also replaced. New screws can be purchased at a hardware store.
FAQs:
Q: Can I remove the doorknob from my door if it doesn’t have screws?
Yes, you can. The type of doorknob and door combination will determine which method is used to remove the doorknob.
Q: What should I do if the screws on the inside of the door are old and worn?
You can replace the screws with new screws that can be purchased at a hardware store.
Q: Can I install the doorknob myself?
Yes, you can. Replacing a doorknob is a simple process that can be done by anyone.
Q: Can I use a screwdriver to remove the doorknob?
Yes, you can. The screwdriver should be inserted into the keyhole and turned in the direction that the knob is supposed to turn in order to open the door. This will loosen the doorknob.
Q: Can I use a wrench to remove the doorknob?
Yes, you can. The wrench should be inserted into the keyhole and turned in the direction that the knob is supposed to turn in order to open the door. This will loosen the doorknob. Once the doorknob is loose, it can be pulled off of the door.
Q: Can I use this method to remove the doorknob from my child’s room?
You should use the screwdriver method instead for your child’s room. The screwdriver should be inserted into the keyhole on the side that does not have the knob and turned in the direction that the knob is supposed to turn in order to open the door.
Wrapping Up: How To Remove Door Knob With No Screws
Removing a doorknob without screws is a simple process that can be done by anyone. The type of doorknob and door combination will determine which method is used to remove the doorknob. Always make sure that the door is unlocked before removing the doorknob. Be very careful when using a hammer and nail. Make sure that you do not hit your hand or fingers with the hammer.
Always make sure that the doorknob is properly installed before using it. Improper installation can cause the doorknob to come off of the door while it is being opened or closed. Make sure that the doorknob is turned off before leaving the home. This will prevent someone from being able to unlock the door from the outside.
Related Posts: